Hard water in a bathroom can cause limescale deposits which not only can clog the pipes and prevent the shower head from flowing at full speed, but also leave white marks on the tapware. Despite regular cleaning of your bathroom with standard cleaning products, it is important to insist on cleaning the shower head.
How to remove limescale from the shower head?
On removable shower head
Daily cleaning with a bathroom maintenance spray will reduce soap residue on taps and keep them free from limescale deposits causing white streaks. However, the indoor shower head should be cleaned as soon as you experience a reduction in water flow when using it. Here is an everyday product that can be used in these cases.
Prepare a sponge and squeeze some toothpaste on it. Then pass the soft sponge over the encrusted surface and leave the product to act for a few minutes. Then remove the paste with a soft, clean cloth, then rinse the shower head or faucet with clean water. Thanks to the toothpaste, the white plaque will have completely disappeared.
Another tip is to use white vinegar and a toothpick or toothbrush. To do this, you must remove the shower head using an adjustable wrench. Then immerse the shower head in a deep bowl filled with distilled white vinegar. Let the shower head soak for at least 30 minutes. Then take an old toothbrush or toothpick to scrub or remove any limescale deposits from the jet ports. Finally, rinse each component and replace the shower head.
On fixed shower head
For this method, you will need to create a soaking bag. Pour one cup of distilled white vinegar into a food storage bag, preferably heavy duty. Make sure the bag is big enough. Secure the bag with a rubber band or tape around the shower head so it doesn’t slip. Then, let the shower head soak for at least four hours, or even overnight. The next day, scrub it with an old toothbrush. This will remove scale deposits by also using a toothpick or unfolded paperclip to clean each shower head nozzle. Finally, rinse the exterior of the faucet with fresh water and let the water run at full strength to remove any remaining deposits left inside.
Clean and dry a shower head with a cloth – source: spm
pinterest logo
Clean and dry a shower head with a cloth – Source: spm
How to prevent white plaque deposits on the shower head?
1-Dry the shower head well after each use.
2-Use a squeegee or towel to remove water and moisture from shower stalls and doors after each use.
3-Prepare a spray bottle with a solution of equal parts distilled water and white vinegar to spray it on the cabin and shower head after each use.
4-Consider adding a water softening system if you live in an area where water is hard and you are often faced with unclogging your pipes and removing excess mineral deposits like limescale.
The most effective product for removing any white plaque deposits on your taps is finally right in front of you!